Blur Skin Smoother with Sunscreen No. 1815

By: TOM BRANNA

Editor

Ingredients

%

Phase A

Deionized water
57.11

Disodium EDTA (Ruger Chemical)
0.10

Pemulen TR-1 (Lubrizol) (Acrylates/C10-30 alkyl acrylate crosspolymer)
0.12

Liponic EG-1 (Lipo Chemicals, Inc.) (Glycereth-26)
1.50

Phase B

Lipomulse Luxe (Lipo Chemicals, Inc.) (Cetearyl alcohol (and) glyceryl stearate (and) PEG-40 stearate (and) ceteareth-20)
6.00

Neo Heliopan Type AV (Symrise) (Ethylhexyl methoxycinnamate (octinoxate)*)
7.50

Neo Heliopan Type OS (Symrise) (Ethylhexyl salicylate (octisalate)*)
5.00

Neo Heliopan Type BB (Symrise) (Benzophenone-3 (Oxybenzone)*)
3.00

Neo Heliopan 303 (Symrise) (Octocrylene)
5.00

Liponate NPGC-2 (Lipo Chemicals, Inc.) (Neopentyl glycol dicaprylate/dicaprate)
7.00

Vitamin E Acetate (Ruger Chemcial) (Tocopheryl acetate)
0.10

Liponate OP-26 (Lipo Chemicals, Inc.) (PPG-26 Oleate)
4.00

Phase C

Sodium hydroxide solution 18% (Ruger Chemical)
0.27

Phase D

Gorgonian Extract GC (Lipo Chemicals, Inc.) (Caprylic/capric triglyceride (and) sea whip extract)
0.30

Phase E

Marsh Mallow Powder (Lipo/Sunjin) (HDI/trimethylol hexyllactone crosspolymer (and) polymethyl methacrylate)
3.00

Phase F

Preservative
q.s.

Procedure

Combine the water, disodium EDTA and Pemulen TR-1 and mix with high speed propeller agitation while heating to 80°C. When Pemulen is dispersed add remaining phase A ingredients, continue mixing and heating. In a side kettle, combine phase B ingredients and heat to 80°C. Mix until uniform. Slowly add phase B to phase A and mix with medium propeller agitation for 15 minutes until emulsification is complete. Slowly add phase C to main vessel continue mixing, start cooling. Cool batch to 55°C with mixing and slowly add phase D then phase E. Begin cooling batch further with mixing. Add phase F while mixing. Shutdown when batch reaches 32°C.